Skip to main content
Inspection outcome
Opened: March 6, 2023 · Closed: April 12, 2024
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Follow-up · Partial — limited to specific operations or areas

Violations3
Serious+1
Initial penalty$26,961
Current penalty$10,800
Accidents0
Duration403d
Summary

What happened in this inspection

On March 6, 2023, OSHA opened Tramont Manufacturing Llc’s inspection #346547219 at MILWAUKEE, Wisconsin. The case was administratively closed on April 12, 2024, 403 days after opening.

OSHA cited the employer for 3 violations totaling $10,800 in current penalties — reduced from an initial proposed total of $26,961. Of those, 1 was classified as Serious or worse.

Breakdown by classification
3violations total
Repeat133%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious267%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

3citations issued
$10,800current penalty
↓ $16,161total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.179(n)(1)View full regulation text on OSHA.gov
Initial$15,469
Current$3,905reduced by $11,564
Seriousgravity 5
Citation #01002
29 CFR 1926.453(b)(2)(v)View full regulation text on OSHA.gov
Initial$11,050
Current$6,630reduced by $4,420
Repeat
Citation #02001
29 CFR 1910.1200(f)(6)View full regulation text on OSHA.gov
Initial$442
Current$265reduced by $177

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346547219 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Tramont Manufacturing Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Follow-up — a follow-up inspection to verify abatement of previously cited violations.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346547219 directly: