Skip to main content
Inspection outcome
Opened: January 11, 2021 · Closed: July 26, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Follow-up · Comprehensive — entire establishment

Violations13
Serious+0
Initial penalty$173,394
Current penalty$126,087
Accidents0
Duration1292d
Summary

What happened in this inspection

On January 11, 2021, OSHA opened Tramont Manufacturing Llc’s inspection #345092803 at MILWAUKEE, Wisconsin. The case was administratively closed on July 26, 2024, 1292 days after opening.

OSHA cited the employer for 13 violations totaling $126,087 in current penalties — reduced from an initial proposed total of $173,394. All citations were Other-than-serious.

Breakdown by classification
13violations total
Repeat323%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious862%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious215%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

13citations issued
$126,087current penalty
↓ $47,307total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001A
29 CFR 1910.147(c)(4)(ii)View full regulation text on OSHA.gov
Initial$13,653
Current$10,653reduced by $3,000
Seriousgravity 10
Citation #01002
29 CFR 1910.157(g)(1)View full regulation text on OSHA.gov
Initial$13,653
Current$10,653reduced by $3,000
Seriousgravity 10
Citation #01004A
29 CFR 1910.179(g)(1)(v)View full regulation text on OSHA.gov
Initial$13,653
Current$10,653reduced by $3,000
Seriousgravity 10
Citation #01005
29 CFR 1910.179(j)(2)View full regulation text on OSHA.gov
Initial$13,653
Current$11,782reduced by $1,871
Seriousgravity 10
Citation #01006
29 CFR 1910.212(a)(3)(ii)View full regulation text on OSHA.gov
Initial$13,653
Current$13,653
Othergravity 1
Citation #01007
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$6,436
Current$0reduced by $6,436
Repeatgravity 10
Citation #02001
29 CFR 1910.133(a)(1)View full regulation text on OSHA.gov
Initial$30,037
Current$20,037reduced by $10,000
Repeatgravity 10
Citation #02002
29 CFR 1910.212(a)(3)(ii)View full regulation text on OSHA.gov
Initial$30,037
Current$20,037reduced by $10,000
Repeatgravity 10
Citation #02003
29 CFR 1910.243(c)(1)View full regulation text on OSHA.gov
Initial$30,037
Current$20,037reduced by $10,000

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345092803 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Tramont Manufacturing Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Follow-up — a follow-up inspection to verify abatement of previously cited violations.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345092803 directly: