Skip to main content
Inspection outcome
Opened: January 16, 2019 · Closed: July 31, 2019
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Follow-up · Partial — limited to specific operations or areas

Violations5
Serious+0
Initial penalty$11,366
Current penalty$11,366
Accidents0
Duration196d
Summary

What happened in this inspection

On January 16, 2019, OSHA opened G & J Container Manufacturing Inc.’s inspection #343716767 at LIVE OAK, Texas — an establishment in the all other plastics product manufacturing industry. The case was administratively closed on July 31, 2019, 196 days after opening.

OSHA cited the employer for 5 violations totaling $11,366 in current penalties. All citations were Other-than-serious.

Breakdown by classification
5violations total
Repeat5100%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Citations

Citations issued in this inspection

5citations issued
$11,366current penalty
Look up on OSHA.gov
Repeatgravity 5
Citation #01001
29 CFR 1910.95(c)(1)View full regulation text on OSHA.gov
Initial$4,546
Current$4,546
Repeatgravity 1
Citation #01002
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$3,410
Current$3,410
Repeatgravity 1
Citation #01003A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$3,410
Current$3,410
Repeatgravity 1
Citation #01003B
29 CFR 1910.1200(g)(8)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343716767 at OSHA Establishment Search.

Same employer

Other OSHA inspections at G & J Container Manufacturing Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Follow-up — a follow-up inspection to verify abatement of previously cited violations.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343716767 directly: