Skip to main content
Inspection outcome
Opened: July 6, 2018 · Closed: June 8, 2021
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations8
Serious+0
Initial penalty$14,967
Current penalty$14,967
Accidents0
Duration1068d
Summary

What happened in this inspection

On July 6, 2018, OSHA opened G & J Container Manufacturing Inc.’s inspection #343278784 at LIVE OAK, Texas — an establishment in the all other plastics product manufacturing industry. The case was administratively closed on June 8, 2021, 1068 days after opening.

OSHA cited the employer for 8 violations totaling $14,967 in current penalties. All citations were Other-than-serious.

Breakdown by classification
8violations total
Serious8100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

8citations issued
$14,967current penalty
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.95(c)(1)View full regulation text on OSHA.gov
Initial$3,880
Current$3,880
Seriousgravity 1
Citation #01002
29 CFR 1910.134(c)View full regulation text on OSHA.gov
Initial$1,663
Current$1,663
Seriousgravity 5
Citation #01003
29 CFR 1910.178(l)(1)(i)View full regulation text on OSHA.gov
Initial$2,772
Current$2,772
Seriousgravity 1
Citation #01004
29 CFR 1910.243(c)(1)View full regulation text on OSHA.gov
Initial$1,663
Current$1,663
Seriousgravity 1
Citation #01006A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$1,663
Current$1,663
Seriousgravity 1
Citation #01006B
29 CFR 1910.1200(g)(8)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343278784 at OSHA Establishment Search.

Same employer

Other OSHA inspections at G & J Container Manufacturing Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343278784 directly: