Skip to main content
Inspection outcome
Opened: December 29, 2021 · Closed: September 15, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations8
Serious+0
Initial penalty$65,406
Current penalty$27,000
Accidents0
Duration260d
Summary

What happened in this inspection

On December 29, 2021, OSHA opened Standard Iron & Metal Co., Llc’s inspection #345704936 at OKLAHOMA CITY, Oklahoma. The case was administratively closed on September 15, 2022, 260 days after opening.

OSHA cited the employer for 8 violations totaling $27,000 in current penalties — reduced from an initial proposed total of $65,406. All citations were Other-than-serious.

Breakdown by classification
8violations total
Serious563%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious338%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

8citations issued
$27,000current penalty
↓ $38,406total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01003
29 CFR 1910.252(b)(3)View full regulation text on OSHA.gov
Initial$11,167
Current$5,900reduced by $5,267
Seriousgravity 10
Citation #01004A
29 CFR 1910.253(e)(5)(iii)View full regulation text on OSHA.gov
Initial$11,167
Current$5,000reduced by $6,167
Othergravity 1
Citation #01005
29 CFR 1926.350(h)View full regulation text on OSHA.gov
Initial$4,786
Current$2,500reduced by $2,286
Seriousgravity 10
Citation #01006
29 CFR 1910.253(e)(5)(v)View full regulation text on OSHA.gov
Initial$22,333
Current$5,600reduced by $16,733

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345704936 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Standard Iron & Metal Co., Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345704936 directly: