Skip to main content
Inspection outcome
Opened: March 12, 2021 · Closed: September 6, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations17
Serious+0
Initial penalty$58,708
Current penalty$35,084
Accidents0
Duration543d
Summary

What happened in this inspection

On March 12, 2021, OSHA opened Standard Iron & Metal Co., Llc’s inspection #345197255 at OKLAHOMA CITY, Oklahoma. The case was administratively closed on September 6, 2022, 543 days after opening.

OSHA cited the employer for 17 violations totaling $35,084 in current penalties — reduced from an initial proposed total of $58,708. All citations were Other-than-serious.

Breakdown by classification
17violations total
Serious17100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

17citations issued
$35,084current penalty
↓ $23,624total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001A
29 CFR 1910.22(c)View full regulation text on OSHA.gov
Initial$5,461
Current$2,730reduced by $2,731
Seriousgravity 1
Citation #01002A
29 CFR 1910.23(b)(8)View full regulation text on OSHA.gov
Initial$4,096
Current$2,048reduced by $2,048
Seriousgravity 1
Citation #01002B
29 CFR 1910.25(b)(7)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01003A
29 CFR 1910.23(b)(1)View full regulation text on OSHA.gov
Initial$4,096
Current$2,048reduced by $2,048
Seriousgravity 1
Citation #01003B
29 CFR 1910.23(d)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01003C
29 CFR 1910.23(d)(4)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01004A
29 CFR 1910.147(c)(1)View full regulation text on OSHA.gov
Initial$9,557
Current$6,689reduced by $2,868
Seriousgravity 10
Citation #01005A
29 CFR 1910.147(c)(4)(ii)(b)View full regulation text on OSHA.gov
Initial$9,557
Current$6,689reduced by $2,868
Seriousgravity 10
Citation #01005B
29 CFR 1910.147(d)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01006
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$9,557
Current$6,689reduced by $2,868
Seriousgravity 5
Citation #01007A
29 CFR 1910.219(c)(2)(i)View full regulation text on OSHA.gov
Initial$6,827
Current$3,413reduced by $3,414
Seriousgravity 5
Citation #01007B
29 CFR 1910.219(f)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01008A
29 CFR 1910.219(d)(1)View full regulation text on OSHA.gov
Initial$9,557
Current$4,778reduced by $4,779

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345197255 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Standard Iron & Metal Co., Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345197255 directly: