Skip to main content
Inspection outcome
Opened: July 23, 2020 · Closed: February 12, 2021
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations4
Serious+0
Initial penalty$32,772
Current penalty$16,384
Accidents0
Duration204d
Summary

What happened in this inspection

On July 23, 2020, OSHA opened Steel King Industries, Inc.’s inspection #344847447 at STEVENS POINT, Wisconsin. The case was administratively closed on February 12, 2021, 204 days after opening.

OSHA cited the employer for 4 violations totaling $16,384 in current penalties — reduced from an initial proposed total of $32,772. All citations were Other-than-serious.

Breakdown by classification
4violations total
Serious375%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious125%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

4citations issued
$16,384current penalty
↓ $16,388total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001B
29 CFR 1910.147(d)View full regulation text on OSHA.gov
Initial$13,494
Current$0reduced by $13,494
Seriousgravity 5
Citation #01003
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$9,639
Current$6,745reduced by $2,894

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344847447 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Steel King Industries, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344847447 directly: