Skip to main content
Inspection outcome
Opened: December 2, 2025 · Closed: April 27, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations14
Serious+0
Initial penalty$62,987
Current penalty$33,875
Accidents0
Duration146d
Summary

What happened in this inspection

On December 2, 2025, OSHA opened Techniply, Llc’s inspection #348621293 at OCONTO FALLS, Wisconsin. The case was administratively closed on April 27, 2026, 146 days after opening.

OSHA cited the employer for 14 violations totaling $33,875 in current penalties — reduced from an initial proposed total of $62,987. All citations were Other-than-serious.

Breakdown by classification
14violations total
Serious643%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious857%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

14citations issued
$33,875current penalty
↓ $29,112total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01004B
29 CFR 1910.178(q)(7)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01005
29 CFR 1910.212(a)(3)(ii)View full regulation text on OSHA.gov
Initial$8,513
Current$5,107reduced by $3,406
Seriousgravity 10
Citation #01006A
29 CFR 1910.213(r)(1)View full regulation text on OSHA.gov
Initial$11,916
Current$7,149reduced by $4,767
Seriousgravity 5
Citation #01006B
29 CFR 1910.213(r)(4)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #01006C
29 CFR 1910.219(d)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 10
Citation #01006E
29 CFR 1910.219(f)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #01007A
29 CFR 1910.305(b)(1)(i)View full regulation text on OSHA.gov
Initial$6,809
Current$1,702reduced by $5,107
Othergravity 5
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$6,809
Current$3,745reduced by $3,064
Seriousgravity 10
Citation #01002
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$11,916
Current$5,958reduced by $5,958
Othergravity 5
Citation #01003
29 CFR 1910.176(b)View full regulation text on OSHA.gov
Initial$10,215
Current$6,129reduced by $4,086
Seriousgravity 5
Citation #01004A
29 CFR 1910.178(p)(1)View full regulation text on OSHA.gov
Initial$6,809
Current$4,085reduced by $2,724

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348621293 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Techniply, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348621293 directly: