Skip to main content
Inspection outcome
Opened: December 17, 2024 · Closed: May 1, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations2
Serious+0
Initial penalty$27,311
Current penalty$14,298
Accidents0
Duration500d
Summary

What happened in this inspection

On December 17, 2024, OSHA opened Rg Professional Carpenter, Inc.’s inspection #347938870 at MONONA, Wisconsin — an establishment in the framing contractors industry. The case was administratively closed on May 1, 2026, 500 days after opening.

OSHA cited the employer for 2 violations totaling $14,298 in current penalties — reduced from an initial proposed total of $27,311. All citations were Other-than-serious.

Breakdown by classification
2violations total
Repeat150%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious150%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

2citations issued
$14,298current penalty
↓ $13,013total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1926.451(g)(1)View full regulation text on OSHA.gov
Initial$9,104
Current$4,766reduced by $4,338
Repeatgravity 5
Citation #02001
29 CFR 1926.451(c)(2)(v)View full regulation text on OSHA.gov
Initial$18,207
Current$9,532reduced by $8,675

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347938870 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Rg Professional Carpenter, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347938870 directly: