Skip to main content
Inspection outcome
Opened: October 26, 2022 · Closed: April 15, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Referral · Partial — limited to specific operations or areas

Violations12
Serious+0
Initial penalty$112,506
Current penalty$75,140
Accidents0
Duration537d
Summary

What happened in this inspection

On October 26, 2022, OSHA opened Universal Recycling Technologies, Llc’s inspection #346305956 at JANESVILLE, Wisconsin. The case was administratively closed on April 15, 2024, 537 days after opening.

OSHA cited the employer for 12 violations totaling $75,140 in current penalties — reduced from an initial proposed total of $112,506. All citations were Other-than-serious.

Breakdown by classification
12violations total
Serious12100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

12citations issued
$75,140current penalty
↓ $37,366total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001A
29 CFR 1910.134(a)(1)View full regulation text on OSHA.gov
Initial$14,063
Current$11,954reduced by $2,109
Seriousgravity 10
Citation #01001C
29 CFR 1910.1000(e)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$8,036
Current$6,831reduced by $1,205
Seriousgravity 5
Citation #01003
29 CFR 1910.134(f)(1)View full regulation text on OSHA.gov
Initial$10,046
Current$8,539reduced by $1,507
Seriousgravity 10
Citation #01004
29 CFR 1910.1025(d)(2)View full regulation text on OSHA.gov
Initial$14,063
Current$0reduced by $14,063
Seriousgravity 10
Citation #01005
29 CFR 1910.1025(e)(3)(ii)View full regulation text on OSHA.gov
Initial$14,063
Current$11,954reduced by $2,109
Seriousgravity 10
Citation #01006
29 CFR 1910.1025(f)(3)(i)(a)View full regulation text on OSHA.gov
Initial$14,063
Current$11,954reduced by $2,109
Seriousgravity 10
Citation #01007A
29 CFR 1910.1025(h)(1)View full regulation text on OSHA.gov
Initial$14,063
Current$11,954reduced by $2,109
Seriousgravity 10
Citation #01007B
29 CFR 1910.1027(k)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01008
29 CFR 1910.1025(j)(3)(i)(b)View full regulation text on OSHA.gov
Initial$14,063
Current$11,954reduced by $2,109
Seriousgravity 5
Citation #01009
29 CFR 1910.1027(d)(1)(i)View full regulation text on OSHA.gov
Initial$10,046
Current$0reduced by $10,046

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346305956 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Universal Recycling Technologies, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346305956 directly: