Skip to main content
Inspection outcome
Opened: January 9, 2020 · Closed: August 12, 2021
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Follow-up · Partial — limited to specific operations or areas

Violations5
Serious+0
Initial penalty$19,278
Current penalty$4,084
Accidents0
Duration581d
Summary

What happened in this inspection

On January 9, 2020, OSHA opened Oak Ridge Custom Cabinets, Inc.’s inspection #344547724 at GREEN BAY, Wisconsin. The case was administratively closed on August 12, 2021, 581 days after opening.

OSHA cited the employer for 5 violations totaling $4,084 in current penalties — reduced from an initial proposed total of $19,278. All citations were Other-than-serious.

Breakdown by classification
5violations total
Repeat360%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Other-than-serious240%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

5citations issued
$4,084current penalty
↓ $15,194total reduction
Look up on OSHA.gov
Repeatgravity 5
Citation #02001A
29 CFR 1910.147(c)(1)View full regulation text on OSHA.gov
Initial$7,711
Current$3,084reduced by $4,627
Other
Citation #02002
29 CFR 1910.178(l)(1)(i)View full regulation text on OSHA.gov
Initial$7,711
Current$1,000reduced by $6,711

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344547724 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Oak Ridge Custom Cabinets, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Follow-up — a follow-up inspection to verify abatement of previously cited violations.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344547724 directly: