Skip to main content
Inspection outcome
Opened: May 19, 2021 · Closed: January 22, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations11
Serious+0
Initial penalty$20,483
Current penalty$7,901
Accidents0
Duration978d
Summary

What happened in this inspection

On May 19, 2021, OSHA opened L&n Metal Works Llc’s inspection #345318034 at GILLETT, Wisconsin — an establishment in the all other miscellaneous fabricated metal product manufacturing industry. The case was administratively closed on January 22, 2024, 978 days after opening.

OSHA cited the employer for 11 violations totaling $7,901 in current penalties — reduced from an initial proposed total of $20,483. All citations were Other-than-serious.

Breakdown by classification
11violations total
Serious11100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

11citations issued
$7,901current penalty
↓ $12,582total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001A
29 CFR 1910.147(c)(1)View full regulation text on OSHA.gov
Initial$2,926
Current$1,463reduced by $1,463
Seriousgravity 5
Citation #01002
29 CFR 1910.178(q)(6)View full regulation text on OSHA.gov
Initial$2,341
Current$1,170reduced by $1,171
Seriousgravity 5
Citation #01003A
29 CFR 1910.179(j)(3)View full regulation text on OSHA.gov
Initial$2,926
Current$2,926
Seriousgravity 5
Citation #01003B
29 CFR 1910.184(e)(1)View full regulation text on OSHA.gov
Initial$2,341
Current$0reduced by $2,341
Seriousgravity 5
Citation #01003C
29 CFR 1910.184(e)(3)(i)View full regulation text on OSHA.gov
Initial$2,341
Current$0reduced by $2,341
Seriousgravity 5
Citation #01006A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$2,341
Current$1,171reduced by $1,170
Seriousgravity 5
Citation #01006B
29 CFR 1910.212(a)(3)(ii)View full regulation text on OSHA.gov
Initial$2,926
Current$0reduced by $2,926
Seriousgravity 5
Citation #01008
29 CFR 1910.243(c)(1)View full regulation text on OSHA.gov
Initial$2,341
Current$1,171reduced by $1,170

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345318034 at OSHA Establishment Search.

Same employer

Other OSHA inspections at L&n Metal Works Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345318034 directly: