Skip to main content
Inspection outcome
Opened: December 5, 2023 · Closed: April 21, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Type M · Comprehensive — entire establishment

Violations20
Serious+0
Initial penalty$156,159
Current penalty$88,729
Accidents0
Duration868d
Summary

What happened in this inspection

On December 5, 2023, OSHA opened Konz Wood Products, Inc.’s inspection #347142630 at APPLETON, Wisconsin. The case was administratively closed on April 21, 2026, 868 days after opening.

OSHA cited the employer for 20 violations totaling $88,729 in current penalties — reduced from an initial proposed total of $156,159. All citations were Other-than-serious.

Breakdown by classification
20violations total
Repeat15%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious1890%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious15%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

20citations issued
$88,729current penalty
↓ $67,430total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01005
29 CFR 1910.165(b)(2)View full regulation text on OSHA.gov
Initial$8,873
Current$4,437reduced by $4,436
Seriousgravity 10
Citation #01006A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$12,421
Current$12,421
Seriousgravity 5
Citation #01006B
29 CFR 1910.213(i)(1)View full regulation text on OSHA.gov
Initial$8,873
Current$0reduced by $8,873
Seriousgravity 10
Citation #01006C
29 CFR 1910.212(a)(3)(ii)View full regulation text on OSHA.gov
Initial$12,421
Current$0reduced by $12,421
Seriousgravity 5
Citation #01006D
29 CFR 1910.213(c)(1)View full regulation text on OSHA.gov
Initial$8,873
Current$0reduced by $8,873
Seriousgravity 5
Citation #01006E
29 CFR 1910.213(c)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01006F
29 CFR 1910.213(c)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01010A
29 CFR 1910.219(c)(4)(i)View full regulation text on OSHA.gov
Initial$8,873
Current$4,437reduced by $4,436
Seriousgravity 5
Citation #01010B
29 CFR 1910.219(f)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01011
29 CFR 1910.253(b)(4)(i)View full regulation text on OSHA.gov
Initial$8,873
Current$4,437reduced by $4,436
Seriousgravity 5
Citation #01012A
29 CFR 1910.303(b)(7)(i)View full regulation text on OSHA.gov
Initial$7,098
Current$3,549reduced by $3,549
Othergravity 5
Citation #02001
29 CFR 1910.28(b)(6)(i)View full regulation text on OSHA.gov
Initial$17,747
Current$8,874reduced by $8,873
Repeatgravity 10
Citation #02002
29 CFR 1910.147(d)View full regulation text on OSHA.gov
Initial$24,842
Current$24,842
Seriousgravity 5
Citation #01001A
29 CFR 1910.25(c)(3)View full regulation text on OSHA.gov
Initial$8,873
Current$4,437reduced by $4,436
Seriousgravity 5
Citation #01001C
29 CFR 1910.28(b)(1)(i)View full regulation text on OSHA.gov
Initial$7,098
Current$0reduced by $7,098

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347142630 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Konz Wood Products, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Type M — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347142630 directly: