Skip to main content
Inspection outcome
Opened: October 28, 2019 · Status: Open
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Programmed Related · Partial — limited to specific operations or areas

Violations11
Serious+0
Initial penalty$21,110
Current penalty$14,779
Accidents0
Duration
Summary

What happened in this inspection

On October 28, 2019, OSHA opened Sampayo Framing Llc’s inspection #344418595 at YORKTOWN, Virginia — an establishment in the framing contractors industry. The case remains open or the close date has not yet been published.

OSHA cited the employer for 11 violations totaling $14,779 in current penalties — reduced from an initial proposed total of $21,110. All citations were Other-than-serious.

Breakdown by classification
11violations total
Repeat545%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious655%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

11citations issued
$14,779current penalty
↓ $6,331total reduction
Look up on OSHA.gov
Seriousgravity 1
Citation #01001A
29 CFR 1926.405(g)(2)(iv)View full regulation text on OSHA.gov
Initial$1,735
Current$1,215reduced by $520
Seriousgravity 1
Citation #01002
29 CFR 1926.501(c)(1)View full regulation text on OSHA.gov
Initial$1,735
Current$1,215reduced by $520
Seriousgravity 5
Citation #01003A
29 CFR 1926.1051(a)View full regulation text on OSHA.gov
Initial$2,520
Current$1,764reduced by $756
Seriousgravity 5
Citation #01003D
29 CFR 1926.1053(b)(9)View full regulation text on OSHA.gov
Initial$0
Current$0
Repeatgravity 1
Citation #02001A
29 CFR 1926.100(a)View full regulation text on OSHA.gov
Initial$3,465
Current$2,426reduced by $1,039
Repeatgravity 1
Citation #02001B
29 CFR 1926.102(a)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Repeatgravity 5
Citation #02002A
29 CFR 1926.404(f)(6)View full regulation text on OSHA.gov
Initial$5,040
Current$3,528reduced by $1,512
Repeatgravity 5
Citation #02002B
29 CFR 1926.416(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Repeatgravity 5
Citation #02003
29 CFR 1926.501(b)(13)View full regulation text on OSHA.gov
Initial$6,615
Current$4,631reduced by $1,984

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344418595 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Sampayo Framing Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Programmed Related — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344418595 directly: