Skip to main content
Inspection outcome
Opened: January 31, 2018 · Closed: November 17, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Comprehensive — entire establishment

Violations25
Serious+0
Initial penalty$25,906
Current penalty$12,957
Accidents0
Duration1751d
Summary

What happened in this inspection

On January 31, 2018, OSHA opened Ervin Moulding And Trim Corp.’s inspection #342975935 at SUFFOLK, Virginia. The case was administratively closed on November 17, 2022, 1751 days after opening.

OSHA cited the employer for 25 violations totaling $12,957 in current penalties — reduced from an initial proposed total of $25,906. All citations were Other-than-serious.

Breakdown by classification
25violations total
Serious25100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

25citations issued
$12,957current penalty
↓ $12,949total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01002
16VAC25-60.120General Duty Clause or unstructured citation
Initial$2,015
Current$1,008reduced by $1,007
Seriousgravity 10
Citation #01001
16VAC25-60.120General Duty Clause or unstructured citation
Initial$12,471
Current$6,236reduced by $6,235
Seriousgravity 5
Citation #01003
29 CFR 1910.37(b)(2)View full regulation text on OSHA.gov
Initial$1,535
Current$768reduced by $767
Seriousgravity 5
Citation #01004A
29 CFR 1910.132(d)(1)View full regulation text on OSHA.gov
Initial$1,825
Current$913reduced by $912
Seriousgravity 10
Citation #01004B
29 CFR 1910.133(a)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01004C
29 CFR 1910.138(a)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01005
29 CFR 1910.151(b)View full regulation text on OSHA.gov
Initial$2,495
Current$1,248reduced by $1,247
Seriousgravity 1
Citation #01006
29 CFR 1910.178(l)(1)(ii)View full regulation text on OSHA.gov
Initial$1,055
Current$528reduced by $527
Seriousgravity 5
Citation #01007A
29 CFR 1910.212(a)(5)View full regulation text on OSHA.gov
Initial$2,015
Current$1,008reduced by $1,007
Seriousgravity 5
Citation #01007B
29 CFR 1910.213(a)(9)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01008A
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$2,495
Current$1,248reduced by $1,247
Seriousgravity 5
Citation #01008C
29 CFR 1910.304(b)(5)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01008J
29 CFR 1910.305(d)(2)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 342975935 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 342975935 directly: