Skip to main content
Inspection outcome
Opened: February 10, 2026 · Status: Open
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Type N · Partial — limited to specific operations or areas

Violations7
Serious+0
Initial penalty$9,060
Current penalty$6,343
Accidents0
Duration
Summary

What happened in this inspection

On February 10, 2026, OSHA opened Miguel Carpentry’s inspection #348738428 at STUARTS DRAFT, Virginia — an establishment in the framing contractors industry. The case remains open or the close date has not yet been published.

OSHA cited the employer for 7 violations totaling $6,343 in current penalties — reduced from an initial proposed total of $9,060. All citations were Other-than-serious.

Breakdown by classification
7violations total
Serious457%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious343%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

7citations issued
$6,343current penalty
↓ $2,717total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1926.100(a)View full regulation text on OSHA.gov
Initial$1,870
Current$1,309reduced by $561
Seriousgravity 5
Citation #01002
29 CFR 1926.102(a)(1)View full regulation text on OSHA.gov
Initial$1,870
Current$1,309reduced by $561
Seriousgravity 10
Citation #01003
29 CFR 1926.501(b)(13)View full regulation text on OSHA.gov
Initial$3,255
Current$2,279reduced by $976
Seriousgravity 5
Citation #01004
29 CFR 1926.1053(b)(1)View full regulation text on OSHA.gov
Initial$2,065
Current$1,446reduced by $619
Othergravity 1
Citation #02001A
29 CFR 1926.50(c)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 1
Citation #02001B
29 CFR 1926.50(d)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 1
Citation #02002
29 CFR 1926.503(a)(1)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348738428 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Miguel Carpentry

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Type N — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348738428 directly: