Skip to main content
Inspection outcome
Opened: September 8, 2022 · Closed: April 2, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations4
Serious+0
Initial penalty$6,216
Current penalty$6,216
Accidents0
Duration937d
Summary

What happened in this inspection

On September 8, 2022, OSHA opened Benigno Victorino-galvan Masonry’s inspection #346204464 at SPRING, Texas — an establishment in the masonry contractors industry. The case was administratively closed on April 2, 2025, 937 days after opening.

OSHA cited the employer for 4 violations totaling $6,216 in current penalties. All citations were Other-than-serious.

Breakdown by classification
4violations total
Serious4100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

4citations issued
$6,216current penalty
Look up on OSHA.gov
Seriousgravity 5
Citation #01001A
29 CFR 1926.451(b)(1)View full regulation text on OSHA.gov
Initial$3,108
Current$3,108
Seriousgravity 5
Citation #01001B
29 CFR 1926.451(f)(14)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01001C
29 CFR 1926.452(c)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002
29 CFR 1926.451(e)(1)View full regulation text on OSHA.gov
Initial$3,108
Current$3,108

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346204464 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Benigno Victorino-galvan Masonry

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346204464 directly: