Skip to main content
Inspection outcome
Opened: June 5, 2024 · Status: Open
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations7
Serious+0
Initial penalty$46,783
Current penalty$22,262
Accidents0
Duration
Summary

What happened in this inspection

On June 5, 2024, OSHA opened Advantage Steel Service, Inc.’s inspection #347529620 at NORTH RICHLAND HILLS, Texas. The case remains open or the close date has not yet been published.

OSHA cited the employer for 7 violations totaling $22,262 in current penalties — reduced from an initial proposed total of $46,783. All citations were Other-than-serious.

Breakdown by classification
7violations total
Serious457%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious343%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

7citations issued
$22,262current penalty
↓ $24,521total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.147(c)(1)View full regulation text on OSHA.gov
Initial$11,292
Current$6,775reduced by $4,517
Seriousgravity 5
Citation #01002
29 CFR 1910.179(i)View full regulation text on OSHA.gov
Initial$9,680
Current$0reduced by $9,680
Othergravity 5
Citation #01003
29 CFR 1910.179(j)(2)View full regulation text on OSHA.gov
Initial$6,453
Current$3,872reduced by $2,581
Othergravity 5
Citation #01004
29 CFR 1910.179(j)(3)View full regulation text on OSHA.gov
Initial$6,453
Current$3,872reduced by $2,581
Seriousgravity 5
Citation #01005
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$6,453
Current$3,872reduced by $2,581
Seriousgravity 1
Citation #01006
29 CFR 1910.1200(b)(1)View full regulation text on OSHA.gov
Initial$4,839
Current$2,903reduced by $1,936
Other
Citation #02001
29 CFR 1904.41(a)(1)(i)View full regulation text on OSHA.gov
Initial$1,613
Current$968reduced by $645

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347529620 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Advantage Steel Service, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347529620 directly: