Skip to main content
Inspection outcome
Opened: April 20, 2021 · Closed: April 15, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Type M · Comprehensive — entire establishment

Violations9
Serious+0
Initial penalty$30,158
Current penalty$18,000
Accidents0
Duration1091d
Summary

What happened in this inspection

On April 20, 2021, OSHA opened Rivera Welding Llc’s inspection #345262752 at MCALLEN, Texas. The case was administratively closed on April 15, 2024, 1091 days after opening.

OSHA cited the employer for 9 violations totaling $18,000 in current penalties — reduced from an initial proposed total of $30,158. All citations were Other-than-serious.

Breakdown by classification
9violations total
Serious556%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious444%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

9citations issued
$18,000current penalty
↓ $12,158total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.94(a)(5)(iv)View full regulation text on OSHA.gov
Initial$5,461
Current$4,500reduced by $961
Seriousgravity 10
Citation #01002
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$5,461
Current$4,500reduced by $961
Seriousgravity 10
Citation #01003A
29 CFR 1910.146(c)(4)View full regulation text on OSHA.gov
Initial$5,461
Current$4,500reduced by $961
Seriousgravity 10
Citation #01003B
29 CFR 1910.146(g)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01004
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$5,461
Current$4,500reduced by $961
Other
Citation #02001
29 CFR 1904.39(a)(1)View full regulation text on OSHA.gov
Initial$7,000
Current$0reduced by $7,000
Other
Citation #02002
29 CFR 1910.132(d)(1)View full regulation text on OSHA.gov
Initial$438
Current$0reduced by $438
Other
Citation #02003
29 CFR 1910.132(f)(1)View full regulation text on OSHA.gov
Initial$438
Current$0reduced by $438
Other
Citation #02004
29 CFR 1910.134(k)(3)View full regulation text on OSHA.gov
Initial$438
Current$0reduced by $438

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345262752 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Type M — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345262752 directly: