Skip to main content
Inspection outcome
Opened: February 27, 2019 · Closed: August 30, 2019
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Health inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations6
Serious+2
Initial penalty$4,423
Current penalty$2,653
Accidents0
Duration184d
Summary

What happened in this inspection

On February 27, 2019, OSHA opened Tanmar Companies, Llc’s inspection #343847364 at KENT, Texas. The case was administratively closed on August 30, 2019, 184 days after opening.

OSHA cited the employer for 6 violations totaling $2,653 in current penalties — reduced from an initial proposed total of $4,423. Of those, 2 were classified as Serious or worse.

Breakdown by classification
6violations total
Repeat233%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Other-than-serious467%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

6citations issued
$2,653current penalty
↓ $1,770total reduction
Look up on OSHA.gov
Repeat
Citation #01001A
29 CFR 1910.305(b)(1)(i)View full regulation text on OSHA.gov
Initial$2,085
Current$1,251reduced by $834
Other
Citation #02001
29 CFR 1910.303(g)(2)(i)View full regulation text on OSHA.gov
Initial$1,169
Current$701reduced by $468
Other
Citation #02002A
29 CFR 1910.305(b)(2)(i)View full regulation text on OSHA.gov
Initial$1,169
Current$701reduced by $468

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343847364 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Tanmar Companies, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343847364 directly: