Skip to main content
Inspection outcome
Opened: December 27, 2019 · Closed: August 1, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$78,247
Current penalty$46,949
Accidents0
Duration948d
Summary

What happened in this inspection

On December 27, 2019, OSHA opened Pinnacle Machine Works, Llc’s inspection #344530837 at HOUSTON, Texas. The case was administratively closed on August 1, 2022, 948 days after opening.

OSHA cited the employer for 6 violations totaling $46,949 in current penalties — reduced from an initial proposed total of $78,247. All citations were Other-than-serious.

Breakdown by classification
6violations total
Repeat233%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious350%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious117%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

6citations issued
$46,949current penalty
↓ $31,298total reduction
Look up on OSHA.gov
Seriousgravity 1
Citation #01001
29 CFR 1910.22(a)(3)View full regulation text on OSHA.gov
Initial$5,725
Current$3,435reduced by $2,290
Seriousgravity 5
Citation #01002
29 CFR 1910.147(c)(7)(i)View full regulation text on OSHA.gov
Initial$9,543
Current$5,726reduced by $3,817
Seriousgravity 5
Citation #01003
29 CFR 1910.305(g)(1)(iv)(a)View full regulation text on OSHA.gov
Initial$9,543
Current$5,726reduced by $3,817
Repeatgravity 10
Citation #02001
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$26,718
Current$16,031reduced by $10,687
Repeatgravity 10
Citation #02002
29 CFR 1910.147(d)(3)View full regulation text on OSHA.gov
Initial$26,718
Current$16,031reduced by $10,687

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344530837 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Pinnacle Machine Works, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344530837 directly: