Skip to main content
Inspection outcome
Opened: October 1, 2019 · Closed: April 11, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Comprehensive — entire establishment

Violations5
Serious+0
Initial penalty$94,458
Current penalty$61,400
Accidents0
Duration1654d
Summary

What happened in this inspection

On October 1, 2019, OSHA opened Kik Custom Products’s inspection #344348628 at HOUSTON, Texas. The case was administratively closed on April 11, 2024, 1654 days after opening.

OSHA cited the employer for 5 violations totaling $61,400 in current penalties — reduced from an initial proposed total of $94,458. All citations were Other-than-serious.

Breakdown by classification
5violations total
Repeat240%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious360%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

5citations issued
$61,400current penalty
↓ $33,058total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$13,494
Current$13,494
Seriousgravity 10
Citation #01001B
29 CFR 1910.147(d)(6)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002
29 CFR 1910.151(c)View full regulation text on OSHA.gov
Initial$13,494
Current$436reduced by $13,058
Repeatgravity 10
Citation #02001A
29 CFR 1910.132(a)View full regulation text on OSHA.gov
Initial$67,470
Current$47,470reduced by $20,000
Repeatgravity 10
Citation #02001B
29 CFR 1910.132(d)(1)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344348628 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344348628 directly: