Skip to main content
Inspection outcome
Opened: April 27, 2018 · Closed: January 10, 2019
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Comprehensive — entire establishment

Violations6
Serious+0
Initial penalty$13,797
Current penalty$8,279
Accidents0
Duration258d
Summary

What happened in this inspection

On April 27, 2018, OSHA opened B-w Grinding Services, Inc.’s inspection #343120648 at HOUSTON, Texas — an establishment in the machine shops industry. The case was administratively closed on January 10, 2019, 258 days after opening.

OSHA cited the employer for 6 violations totaling $8,279 in current penalties — reduced from an initial proposed total of $13,797. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious6100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

6citations issued
$8,279current penalty
↓ $5,518total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$6,596
Current$3,958reduced by $2,638
Seriousgravity 5
Citation #01002A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$4,398
Current$2,639reduced by $1,759
Seriousgravity 5
Citation #01002B
29 CFR 1910.215(a)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01003A
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$2,803
Current$1,682reduced by $1,121
Seriousgravity 1
Citation #01003B
29 CFR 1910.304(g)(5)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343120648 at OSHA Establishment Search.

Same employer

Other OSHA inspections at B-w Grinding Services, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343120648 directly: