Skip to main content
Inspection outcome
Opened: February 12, 2019 · Closed: July 17, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations11
Serious+0
Initial penalty$39,402
Current penalty$13,750
Accidents0
Duration521d
Summary

What happened in this inspection

On February 12, 2019, OSHA opened 3 L Designs, Inc.’s inspection #343778742 at DALLAS, Texas. The case was administratively closed on July 17, 2020, 521 days after opening.

OSHA cited the employer for 11 violations totaling $13,750 in current penalties — reduced from an initial proposed total of $39,402. All citations were Other-than-serious.

Breakdown by classification
11violations total
Serious1091%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious19%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

11citations issued
$13,750current penalty
↓ $25,652total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.133(a)(2)View full regulation text on OSHA.gov
Initial$3,789
Current$2,250reduced by $1,539
Seriousgravity 5
Citation #01003
29 CFR 1910.212(b)View full regulation text on OSHA.gov
Initial$3,031
Current$1,800reduced by $1,231
Seriousgravity 10
Citation #01004A
29 CFR 1910.213(c)(1)View full regulation text on OSHA.gov
Initial$5,304
Current$3,700reduced by $1,604
Seriousgravity 10
Citation #01004B
29 CFR 1910.213(c)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01004C
29 CFR 1910.213(c)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01005A
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$5,304
Current$3,000reduced by $2,304
Seriousgravity 5
Citation #01005B
29 CFR 1910.303(c)(3)(i)View full regulation text on OSHA.gov
Initial$3,789
Current$0reduced by $3,789
Seriousgravity 10
Citation #01005C
29 CFR 1910.305(b)(1)(ii)View full regulation text on OSHA.gov
Initial$5,304
Current$0reduced by $5,304
Seriousgravity 10
Citation #01005D
29 CFR 1910.305(g)(1)(iv)(d)View full regulation text on OSHA.gov
Initial$5,304
Current$0reduced by $5,304
Seriousgravity 10
Citation #01008
29 CFR 1910.305(b)(2)(i)View full regulation text on OSHA.gov
Initial$5,304
Current$3,000reduced by $2,304

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343778742 at OSHA Establishment Search.

Same employer

Other OSHA inspections at 3 L Designs, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343778742 directly: