Skip to main content
Inspection outcome
Opened: December 23, 2022 · Closed: November 8, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Type M · Partial — limited to specific operations or areas

Violations7
Serious+0
Initial penalty$46,208
Current penalty$26,720
Accidents0
Duration686d
Summary

What happened in this inspection

On December 23, 2022, OSHA opened Gold Star Metals, Llc.’s inspection #346407166 at CHANNELVIEW, Texas. The case was administratively closed on November 8, 2024, 686 days after opening.

OSHA cited the employer for 7 violations totaling $26,720 in current penalties — reduced from an initial proposed total of $46,208. All citations were Other-than-serious.

Breakdown by classification
7violations total
Other-than-serious7100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

7citations issued
$26,720current penalty
↓ $19,488total reduction
Look up on OSHA.gov
Othergravity 10
Citation #01001
29 CFR 1910.178(o)(6)View full regulation text on OSHA.gov
Initial$14,063
Current$14,063
Othergravity 5
Citation #01002A
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$10,046
Current$7,032reduced by $3,014
Othergravity 5
Citation #01002B
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #01002C
29 CFR 1910.134(f)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 10
Citation #01003
29 CFR 1910.178(m)(7)View full regulation text on OSHA.gov
Initial$14,063
Current$0reduced by $14,063
Othergravity 5
Citation #01004A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$8,036
Current$5,625reduced by $2,411
Othergravity 5
Citation #01004B
29 CFR 1910.1200(h)(1)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346407166 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Type M — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346407166 directly: