Skip to main content
Inspection outcome
Opened: June 17, 2024 · Closed: September 10, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Unprogrammed Other · Partial — limited to specific operations or areas

Violations4
Serious+0
Initial penalty$6,400
Current penalty$5,760
Accidents0
Duration85d
Summary

What happened in this inspection

On June 17, 2024, OSHA opened Precision Walls, Inc.’s inspection #347559320 at NASHVILLE, Tennessee — an establishment in the drywall & insulation contractors industry. The case was administratively closed on September 10, 2024, 85 days after opening.

OSHA cited the employer for 4 violations totaling $5,760 in current penalties — reduced from an initial proposed total of $6,400. All citations were Other-than-serious.

Breakdown by classification
4violations total
Other-than-serious4100%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

4citations issued
$5,760current penalty
↓ $640total reduction
Look up on OSHA.gov
Othergravity 7
Citation #01001
29 CFR 1910.134(c)(2)(ii)View full regulation text on OSHA.gov
Initial$3,200
Current$2,880reduced by $320
Othergravity 6
Citation #01002A
29 CFR 1926.1153(f)(1)View full regulation text on OSHA.gov
Initial$2,800
Current$2,520reduced by $280
Othergravity 1
Citation #02001
TDLWD RULE 800-01-09-.07General Duty Clause or unstructured citation
Initial$400
Current$360reduced by $40

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347559320 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Precision Walls, Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Unprogrammed Other — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347559320 directly: