Skip to main content
Inspection outcome
Opened: November 15, 2019 · Closed: June 19, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations10
Serious+0
Initial penalty$4,750
Current penalty$3,562
Accidents0
Duration217d
Summary

What happened in this inspection

On November 15, 2019, OSHA opened A-welders & Medical Supply, Inc.’s inspection #344452396 at KNOXVILLE, Tennessee. The case was administratively closed on June 19, 2020, 217 days after opening.

OSHA cited the employer for 10 violations totaling $3,562 in current penalties — reduced from an initial proposed total of $4,750. All citations were Other-than-serious.

Breakdown by classification
10violations total
Serious990%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious110%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

10citations issued
$3,562current penalty
↓ $1,188total reduction
Look up on OSHA.gov
Othergravity 10
Citation #02001
TDLWD RULE 800-01-03-.03(27)(B)1General Duty Clause or unstructured citation
Initial$100
Current$100
Seriousgravity 5
Citation #01001
TCA 50-3-105(1)General Duty Clause or unstructured citation
Initial$300
Current$0reduced by $300
Seriousgravity 6
Citation #01002A
29 CFR 1910.132(d)(2)View full regulation text on OSHA.gov
Initial$350
Current$0reduced by $350
Seriousgravity 6
Citation #01002B
29 CFR 1910.136(a)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 7
Citation #01003A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$4,000
Current$3,462reduced by $538
Seriousgravity 7
Citation #01003B
29 CFR 1910.1200(g)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 7
Citation #01003C
29 CFR 1910.1200(g)(8)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 7
Citation #01003F
TDLWD RULE 800-01-09-.07General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344452396 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344452396 directly: