Skip to main content
Inspection outcome
Opened: March 11, 2020 · Status: Open
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations27
Serious+0
Initial penalty$8,000
Current penalty$8,000
Accidents0
Duration
Summary

What happened in this inspection

On March 11, 2020, OSHA opened Jasper Millworks, L.l.c.’s inspection #344689872 at JASPER, Tennessee. The case remains open or the close date has not yet been published.

OSHA cited the employer for 27 violations totaling $8,000 in current penalties. All citations were Other-than-serious.

Breakdown by classification
27violations total
Serious27100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

27citations issued
$8,000current penalty
Look up on OSHA.gov
Seriousgravity 4
Citation #01001
29 CFR 1910.22(a)(1)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01002
29 CFR 1910.28(b)(1)(i)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01004
29 CFR 1910.37(a)(3)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01005A
29 CFR 1910.37(b)(2)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01005B
29 CFR 1910.37(b)(5)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01007A
29 CFR 1910.107(c)(3)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01007B
29 CFR 1910.107(c)(5)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01008A
29 CFR 1910.107(f)(4)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01008B
29 CFR 1910.107(g)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01008C
29 CFR 1910.107(g)(7)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01009
29 CFR 1910.133(a)(1)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01010A
29 CFR 1910.157(c)(1)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01010B
29 CFR 1910.157(e)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01010C
29 CFR 1910.157(e)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01012
29 CFR 1910.213(d)(1)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01013A
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$500
Current$500
Seriousgravity 4
Citation #01013B
29 CFR 1910.303(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344689872 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Jasper Millworks, L.l.c.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344689872 directly: