Skip to main content
Inspection outcome
Opened: June 17, 2020 · Closed: October 23, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Referral · Partial — limited to specific operations or areas

Violations10
Serious+0
Initial penalty$900
Current penalty$900
Accidents0
Duration128d
Summary

What happened in this inspection

On June 17, 2020, OSHA opened Rose Fabricating & Industrial Solutions, Llc’s inspection #344816715 at COVINGTON, Tennessee. The case was administratively closed on October 23, 2020, 128 days after opening.

OSHA cited the employer for 10 violations totaling $900 in current penalties. All citations were Other-than-serious.

Breakdown by classification
10violations total
Serious550%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious550%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

10citations issued
$900current penalty
Look up on OSHA.gov
Seriousgravity 4
Citation #01001B
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 4
Citation #01001E
29 CFR 1910.134(k)(3)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 1
Citation #02002B
TDLWD RULE 800-01-09-.06(2)General Duty Clause or unstructured citation
Initial$0
Current$0
Othergravity 1
Citation #02002C
TDLWD RULE 800-01-09-.07(4)General Duty Clause or unstructured citation
Initial$0
Current$0
Othergravity 1
Citation #02003
TDLWD RULE 800-01-03-.03(27)(B)1General Duty Clause or unstructured citation
Initial$200
Current$200

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344816715 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Rose Fabricating & Industrial Solutions, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344816715 directly: