Skip to main content
Inspection outcome
Opened: July 31, 2025 · Closed: February 25, 2026
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Unprogrammed Other · Partial — limited to specific operations or areas

Violations4
Serious+4
Initial penalty$14,400
Current penalty$10,080
Accidents0
Duration209d
Summary

What happened in this inspection

On July 31, 2025, OSHA opened Delta Maintenance Services Inc.’s inspection #348417692 at BAYAMON, Puerto Rico. The case was administratively closed on February 25, 2026, 209 days after opening.

OSHA cited the employer for 4 violations totaling $10,080 in current penalties — reduced from an initial proposed total of $14,400. Of those, 4 were classified as Serious or worse.

Breakdown by classification
4violations total
Repeat4100%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Citations

Citations issued in this inspection

4citations issued
$10,080current penalty
↓ $4,320total reduction
Look up on OSHA.gov
Repeat
Citation #01001
18 IV A 1General Duty Clause or unstructured citation
Initial$3,600
Current$2,520reduced by $1,080
Repeat
Citation #01002
18 IV A 1General Duty Clause or unstructured citation
Initial$3,600
Current$2,520reduced by $1,080
Repeat
Citation #01003
18 IV A 1General Duty Clause or unstructured citation
Initial$3,600
Current$2,520reduced by $1,080
Repeat
Citation #01004
18 IV A 1General Duty Clause or unstructured citation
Initial$3,600
Current$2,520reduced by $1,080

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348417692 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Delta Maintenance Services Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Unprogrammed Other — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348417692 directly: