Skip to main content
Inspection outcome
Opened: February 26, 2024 · Closed: February 13, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations13
Serious+0
Initial penalty$27,606
Current penalty$14,000
Accidents0
Duration353d
Summary

What happened in this inspection

On February 26, 2024, OSHA opened Pittsburgh Precision Turned Products, Llc’s inspection #347304636 at PITTSBURGH, Pennsylvania. The case was administratively closed on February 13, 2025, 353 days after opening.

OSHA cited the employer for 13 violations totaling $14,000 in current penalties — reduced from an initial proposed total of $27,606. All citations were Other-than-serious.

Breakdown by classification
13violations total
Serious862%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious538%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

13citations issued
$14,000current penalty
↓ $13,606total reduction
Look up on OSHA.gov
Seriousgravity 1
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$2,350
Current$1,500reduced by $850
Seriousgravity 5
Citation #01002
29 CFR 1910.37(b)(1)View full regulation text on OSHA.gov
Initial$3,134
Current$1,500reduced by $1,634
Seriousgravity 10
Citation #01003
29 CFR 1910.132(a)View full regulation text on OSHA.gov
Initial$6,452
Current$3,500reduced by $2,952
Seriousgravity 1
Citation #01004
29 CFR 1910.145(c)(3)View full regulation text on OSHA.gov
Initial$2,350
Current$1,500reduced by $850
Seriousgravity 5
Citation #01005
29 CFR 1910.151(c)View full regulation text on OSHA.gov
Initial$3,918
Current$2,000reduced by $1,918
Seriousgravity 5
Citation #01006
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$3,918
Current$2,000reduced by $1,918
Seriousgravity 5
Citation #01007
29 CFR 1910.242(b)View full regulation text on OSHA.gov
Initial$3,134
Current$1,000reduced by $2,134
Seriousgravity 1
Citation #01008
29 CFR 1910.252(a)(2)(xiii)View full regulation text on OSHA.gov
Initial$2,350
Current$1,000reduced by $1,350
Other
Citation #02005
29 CFR 1910.212(b)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347304636 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Pittsburgh Precision Turned Products, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347304636 directly: