Skip to main content
Inspection outcome
Opened: January 23, 2020 · Closed: September 10, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$9,831
Current penalty$6,500
Accidents0
Duration231d
Summary

What happened in this inspection

On January 23, 2020, OSHA opened Telex Metals Llc’s inspection #344583224 at CROYDON, Pennsylvania. The case was administratively closed on September 10, 2020, 231 days after opening.

OSHA cited the employer for 6 violations totaling $6,500 in current penalties — reduced from an initial proposed total of $9,831. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious6100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

6citations issued
$6,500current penalty
↓ $3,331total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.95(b)(1)View full regulation text on OSHA.gov
Initial$3,277
Current$1,800reduced by $1,477
Seriousgravity 1
Citation #01002A
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$1,966
Current$1,350reduced by $616
Seriousgravity 1
Citation #01002B
29 CFR 1910.134(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01002C
29 CFR 1910.134(k)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003
29 CFR 1910.157(g)(1)View full regulation text on OSHA.gov
Initial$2,622
Current$1,700reduced by $922
Seriousgravity 1
Citation #01004
29 CFR 1910.1200(h)(1)View full regulation text on OSHA.gov
Initial$1,966
Current$1,650reduced by $316

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344583224 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344583224 directly: