Skip to main content
Inspection outcome
Opened: November 21, 2019 · Closed: September 15, 2020
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations9
Serious+9
Initial penalty$5,280
Current penalty$5,280
Accidents0
Duration299d
Summary

What happened in this inspection

On November 21, 2019, OSHA opened 317726125 - Pacific Stainless Products Inc’s inspection #344487897 at SAINT HELENS, Oregon. The case was administratively closed on September 15, 2020, 299 days after opening.

OSHA cited the employer for 9 violations totaling $5,280 in current penalties. Of those, 9 were classified as Serious or worse.

Breakdown by classification
9violations total
Serious9100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

9citations issued
$5,280current penalty
Look up on OSHA.gov
Serious
Citation #01001A
OAR 437-002-0146(4)(A)General Duty Clause or unstructured citation
Initial$2,800
Current$2,800
Serious
Citation #01001B
OAR 437-002-0146(5)(A)General Duty Clause or unstructured citation
Initial$0
Current$0
Serious
Citation #01002
29 CFR 1910.242(b)View full regulation text on OSHA.gov
Initial$560
Current$560
Serious
Citation #01003
29 CFR 1910.184(d)View full regulation text on OSHA.gov
Initial$240
Current$240
Serious
Citation #01004A
29 CFR 1910.215(a)(1)View full regulation text on OSHA.gov
Initial$560
Current$560
Serious
Citation #01005
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$560
Current$560
Serious
Citation #01006
29 CFR 1910.147(c)(1)View full regulation text on OSHA.gov
Initial$560
Current$560

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344487897 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344487897 directly: