Skip to main content
Inspection outcome
Opened: May 6, 2021 · Status: Open
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Comprehensive — entire establishment

Violations21
Serious+0
Initial penalty$1,221,960
Current penalty$38,116
Accidents0
Duration
Summary

What happened in this inspection

On May 6, 2021, OSHA opened General Aluminum Mfg. Company’s inspection #345290753 at WAPAKONETA, Ohio. The case remains open or the close date has not yet been published.

OSHA cited the employer for 21 violations totaling $38,116 in current penalties — reduced from an initial proposed total of $1,221,960. All citations were Other-than-serious.

Breakdown by classification
21violations total
Willful1571%

A Willful violation is one OSHA determined the employer committed with intentional disregard for, or plain indifference to, the OSH Act. It carries the highest civil penalty — up to ~$165,000 per violation. Willful violations are rare and signal the most serious workplace safety failures.

Repeat15%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious524%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

21citations issued
$38,116current penalty
↓ $1,183,844total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$13,653
Current$14,502
Seriousgravity 10
Citation #01002
29 CFR 1910.132(a)View full regulation text on OSHA.gov
Initial$13,653
Current$14,502
Seriousgravity 10
Citation #01003
29 CFR 1910.147(c)(7)(i)(a)View full regulation text on OSHA.gov
Initial$13,653
Current$9,112reduced by $4,541
Seriousgravity 10
Citation #01004A
29 CFR 1910.178(a)(4)View full regulation text on OSHA.gov
Initial$13,653
Current$0reduced by $13,653
Seriousgravity 10
Citation #01004B
29 CFR 1910.178(a)(5)View full regulation text on OSHA.gov
Initial$0
Current$0
Willfulgravity 10
Citation #02001A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$136,532
Current$0reduced by $136,532
Willfulgravity 10
Citation #02001B
29 CFR 1910.147(d)View full regulation text on OSHA.gov
Initial$0
Current$0
Willfulgravity 10
Citation #02002A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$136,532
Current$0reduced by $136,532
Willfulgravity 10
Citation #02003A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$136,532
Current$0reduced by $136,532
Willfulgravity 10
Citation #02004A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$136,532
Current$0reduced by $136,532
Willfulgravity 10
Citation #02005A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$136,532
Current$0reduced by $136,532
Willfulgravity 10
Citation #02006A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$136,532
Current$0reduced by $136,532
Willfulgravity 10
Citation #02007A
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$136,532
Current$0reduced by $136,532
Willfulgravity 10
Citation #02008
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$136,532
Current$0reduced by $136,532
Repeatgravity 10
Citation #03001
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$75,092
Current$0reduced by $75,092

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345290753 at OSHA Establishment Search.

Same employer

Other OSHA inspections at General Aluminum Mfg. Company

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345290753 directly: