Skip to main content
Inspection outcome
Opened: July 11, 2024 · Closed: April 2, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations3
Serious+0
Initial penalty$47,910
Current penalty$28,746
Accidents0
Duration265d
Summary

What happened in this inspection

On July 11, 2024, OSHA opened Major Metals Company’s inspection #347611352 at MANSFIELD, Ohio. The case was administratively closed on April 2, 2025, 265 days after opening.

OSHA cited the employer for 3 violations totaling $28,746 in current penalties — reduced from an initial proposed total of $47,910. All citations were Other-than-serious.

Breakdown by classification
3violations total
Serious3100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

3citations issued
$28,746current penalty
↓ $19,164total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.95(g)(1)View full regulation text on OSHA.gov
Initial$15,970
Current$9,582reduced by $6,388
Seriousgravity 10
Citation #01002
29 CFR 1910.95(i)(2)(ii)(a)View full regulation text on OSHA.gov
Initial$15,970
Current$9,582reduced by $6,388
Seriousgravity 10
Citation #01003
29 CFR 1910.95(k)(3)View full regulation text on OSHA.gov
Initial$15,970
Current$9,582reduced by $6,388

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347611352 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Major Metals Company

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347611352 directly: