Skip to main content
Inspection outcome
Opened: April 28, 2025 · Closed: September 25, 2025
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Type M · Partial — limited to specific operations or areas

Violations4
Serious+0
Initial penalty$44,923
Current penalty$31,440
Accidents0
Duration150d
Summary

What happened in this inspection

On April 28, 2025, OSHA opened Celina Aluminum Precision Technology, Inc.’s inspection #348212465 at CELINA, Ohio. The case was administratively closed on September 25, 2025, 150 days after opening.

OSHA cited the employer for 4 violations totaling $31,440 in current penalties — reduced from an initial proposed total of $44,923. All citations were Other-than-serious.

Breakdown by classification
4violations total
Serious4100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

4citations issued
$31,440current penalty
↓ $13,483total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.147(c)(4)(ii)View full regulation text on OSHA.gov
Initial$16,550
Current$12,000reduced by $4,550
Seriousgravity 5
Citation #01002A
29 CFR 1910.244(a)(1)(ii)View full regulation text on OSHA.gov
Initial$11,823
Current$7,440reduced by $4,383
Seriousgravity 10
Citation #01003
29 CFR 1910.244(a)(2)(iii)View full regulation text on OSHA.gov
Initial$16,550
Current$12,000reduced by $4,550

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348212465 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Type M — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348212465 directly: