Skip to main content
Inspection outcome
Opened: October 4, 2019 · Closed: September 17, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations23
Serious+0
Initial penalty$14,207
Current penalty$7,100
Accidents0
Duration349d
Summary

What happened in this inspection

On October 4, 2019, OSHA opened Hasch Body Shop, Inc’s inspection #344356688 at BRYAN, Ohio — an establishment in the general automotive repair industry. The case was administratively closed on September 17, 2020, 349 days after opening.

OSHA cited the employer for 23 violations totaling $7,100 in current penalties — reduced from an initial proposed total of $14,207. All citations were Other-than-serious.

Breakdown by classification
23violations total
Serious23100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

23citations issued
$7,100current penalty
↓ $7,107total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001A
29 CFR 1910.94(a)(5)(ii)(a)View full regulation text on OSHA.gov
Initial$2,273
Current$1,136reduced by $1,137
Seriousgravity 10
Citation #01002A
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$3,978
Current$1,988reduced by $1,990
Seriousgravity 5
Citation #01002D
29 CFR 1910.1025(d)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002E
29 CFR 1910.1053(d)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002G
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002H
29 CFR 1910.134(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002K
29 CFR 1910.134(k)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01003A
29 CFR 1910.1025(h)(1)View full regulation text on OSHA.gov
Initial$3,978
Current$1,988reduced by $1,990
Seriousgravity 10
Citation #01003B
29 CFR 1910.1027(k)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01004A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$3,978
Current$1,988reduced by $1,990
Seriousgravity 5
Citation #01004C
29 CFR 1910.1200(g)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01004E
29 CFR 1910.1053(j)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01004G
29 CFR 1910.1200(h)(1)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344356688 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344356688 directly: