Skip to main content
Inspection outcome
Opened: December 18, 2019 · Closed: April 30, 2020
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations6
Serious+0
Initial penalty$55,326
Current penalty$11,335
Accidents0
Duration134d
Summary

What happened in this inspection

On December 18, 2019, OSHA opened American Metal Supply Co.’s inspection #344518055 at BLUE ASH, Ohio. The case was administratively closed on April 30, 2020, 134 days after opening.

OSHA cited the employer for 6 violations totaling $11,335 in current penalties — reduced from an initial proposed total of $55,326. All citations were Other-than-serious.

Breakdown by classification
6violations total
Serious6100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

6citations issued
$11,335current penalty
↓ $43,991total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$9,446
Current$9,446
Seriousgravity 10
Citation #01002A
29 CFR 1910.178(l)(1)(ii)View full regulation text on OSHA.gov
Initial$9,446
Current$1,000reduced by $8,446
Seriousgravity 10
Citation #01002B
29 CFR 1910.178(q)(1)View full regulation text on OSHA.gov
Initial$9,446
Current$0reduced by $9,446
Seriousgravity 10
Citation #01004A
29 CFR 1910.184(e)(1)View full regulation text on OSHA.gov
Initial$9,446
Current$889reduced by $8,557
Seriousgravity 5
Citation #01004B
29 CFR 1910.242(b)View full regulation text on OSHA.gov
Initial$8,096
Current$0reduced by $8,096
Seriousgravity 10
Citation #01004C
29 CFR 1910.253(b)(4)(iii)View full regulation text on OSHA.gov
Initial$9,446
Current$0reduced by $9,446

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344518055 at OSHA Establishment Search.

Same employer

Other OSHA inspections at American Metal Supply Co.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344518055 directly: