Skip to main content
Inspection outcome
Opened: February 29, 2024 · Closed: June 17, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations1
Serious+0
Initial penalty$2,765
Current penalty$1,659
Accidents0
Duration109d
Summary

What happened in this inspection

On February 29, 2024, OSHA opened T & L Custom Cabinetry’s inspection #347319790 at DICKINSON, North Dakota. The case was administratively closed on June 17, 2024, 109 days after opening.

OSHA cited the employer for 1 violation totaling $1,659 in current penalties — reduced from an initial proposed total of $2,765. All citations were Other-than-serious.

Breakdown by classification
1violation total
Serious1100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

1citations issued
$1,659current penalty
↓ $1,106total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$2,765
Current$1,659reduced by $1,106

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347319790 at OSHA Establishment Search.

Same employer

Other OSHA inspections at T & L Custom Cabinetry

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347319790 directly: