Skip to main content
Inspection outcome
Opened: January 28, 2026 · Closed: April 27, 2026
Major citations

OSHA issued serious-tier citations with significant penalties.

Safety inspection · Complaint · Partial — limited to specific operations or areas

Violations7
Serious+5
Initial penalty$34,990
Current penalty$24,480
Accidents0
Duration89d
Summary

What happened in this inspection

On January 28, 2026, OSHA opened 160418 - Aallied Die Casting Company Of North Carolina’s inspection #348731399 at RUTHERFORDTON, North Carolina. The case was administratively closed on April 27, 2026, 89 days after opening.

OSHA cited the employer for 7 violations totaling $24,480 in current penalties — reduced from an initial proposed total of $34,990. Of those, 5 were classified as Serious or worse.

Breakdown by classification
7violations total
Serious571%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious229%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

7citations issued
$24,480current penalty
↓ $10,510total reduction
Look up on OSHA.gov
Serious
Citation #01001A
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$14,895
Current$10,425reduced by $4,470
Serious
Citation #01002
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$14,895
Current$10,425reduced by $4,470
Serious
Citation #01003
29 CFR 1910.252(a)(2)(iv)View full regulation text on OSHA.gov
Initial$5,200
Current$3,630reduced by $1,570

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348731399 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348731399 directly: