Skip to main content
Inspection outcome
Opened: September 24, 2025 · Status: Open
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Planned (Programmed) · Partial — limited to specific operations or areas

Violations10
Serious+10
Initial penalty$6,650
Current penalty$4,320
Accidents0
Duration
Summary

What happened in this inspection

On September 24, 2025, OSHA opened 159747 - Carolina Frame And Fabrication, Llc’s inspection #348529397 at HICKORY, North Carolina. The case remains open or the close date has not yet been published.

OSHA cited the employer for 10 violations totaling $4,320 in current penalties — reduced from an initial proposed total of $6,650. Of those, 10 were classified as Serious or worse.

Breakdown by classification
10violations total
Serious10100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

10citations issued
$4,320current penalty
↓ $2,330total reduction
Look up on OSHA.gov
Serious
Citation #01002
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$750
Current$510reduced by $240
Serious
Citation #01003A
29 CFR 1910.213(h)(1)View full regulation text on OSHA.gov
Initial$2,000
Current$1,290reduced by $710
Serious
Citation #01004A
29 CFR 1910.215(a)(2)View full regulation text on OSHA.gov
Initial$1,300
Current$840reduced by $460
Serious
Citation #01005A
29 CFR 1910.219(c)(2)(i)View full regulation text on OSHA.gov
Initial$1,300
Current$840reduced by $460

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 348529397 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 348529397 directly: