Skip to main content
Inspection outcome
Opened: August 12, 2019 · Closed: January 23, 2020
Serious citation issued

OSHA cited the employer for at least one Serious violation.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations16
Serious+1
Initial penalty$1,600
Current penalty$650
Accidents0
Duration164d
Summary

What happened in this inspection

On August 12, 2019, OSHA opened 143188 - Town Of Edenton - Public Works Department’s inspection #344228085 at EDENTON, North Carolina. The case was administratively closed on January 23, 2020, 164 days after opening.

OSHA cited the employer for 16 violations totaling $650 in current penalties — reduced from an initial proposed total of $1,600. Of those, 1 was classified as Serious or worse.

Breakdown by classification
16violations total
Serious16%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious1594%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

16citations issued
$650current penalty
↓ $950total reduction
Look up on OSHA.gov
Other
Citation #02001A
29 CFR 1904.29(a)View full regulation text on OSHA.gov
Initial$400
Current$260reduced by $140
Other
Citation #02003
29 CFR 1910.212(b)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344228085 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344228085 directly: