Skip to main content
Inspection outcome
Opened: October 17, 2024 · Closed: February 19, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations14
Serious+0
Initial penalty$47,997
Current penalty$13,904
Accidents0
Duration490d
Summary

What happened in this inspection

On October 17, 2024, OSHA opened Busch Products Inc.’s inspection #347821571 at SYRACUSE, New York. The case was administratively closed on February 19, 2026, 490 days after opening.

OSHA cited the employer for 14 violations totaling $13,904 in current penalties — reduced from an initial proposed total of $47,997. All citations were Other-than-serious.

Breakdown by classification
14violations total
Serious14100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

14citations issued
$13,904current penalty
↓ $34,093total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
29 CFR 1910.95(c)(1)View full regulation text on OSHA.gov
Initial$6,620
Current$3,972reduced by $2,648
Seriousgravity 5
Citation #01002
29 CFR 1910.212(a)(3)(ii)View full regulation text on OSHA.gov
Initial$8,276
Current$4,966reduced by $3,310
Seriousgravity 5
Citation #01003A
29 CFR 1910.1053(c)View full regulation text on OSHA.gov
Initial$8,276
Current$4,966reduced by $3,310
Seriousgravity 5
Citation #01003B
29 CFR 1910.1053(d)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003C
29 CFR 1910.1053(e)(1)View full regulation text on OSHA.gov
Initial$6,620
Current$0reduced by $6,620
Seriousgravity 1
Citation #01003D
29 CFR 1910.1053(j)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003E
29 CFR 1910.1053(f)(2)(i)View full regulation text on OSHA.gov
Initial$6,620
Current$0reduced by $6,620
Seriousgravity 5
Citation #01003F
29 CFR 1910.1053(g)(2)View full regulation text on OSHA.gov
Initial$6,620
Current$0reduced by $6,620
Seriousgravity 5
Citation #01003G
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003H
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003I
29 CFR 1910.134(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01003J
29 CFR 1910.134(k)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01003L
29 CFR 1910.1053(j)(1)View full regulation text on OSHA.gov
Initial$4,965
Current$0reduced by $4,965

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 347821571 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Busch Products Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 347821571 directly: