Skip to main content
Inspection outcome
Opened: March 21, 2022 · Closed: August 12, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations11
Serious+0
Initial penalty$0
Current penalty$0
Accidents0
Duration144d
Summary

What happened in this inspection

On March 21, 2022, OSHA opened Danby Tn Hwy Dept’s inspection #345856231 at ITHACA, New York — an establishment in the highway, street & bridge construction industry. The case was administratively closed on August 12, 2022, 144 days after opening.

OSHA cited the employer for 11 violations totaling $0 in current penalties. All citations were Other-than-serious.

Breakdown by classification
11violations total
Serious982%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious218%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

11citations issued
$0current penalty
Look up on OSHA.gov
Seriousgravity 1
Citation #01001
29 CFR 1910.37(b)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01002
29 CFR 1910.37(b)(5)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01003
29 CFR 1910.147(c)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01004
29 CFR 1910.157(c)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01005
29 CFR 1910.215(b)(9)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01007
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 1
Citation #01009
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #02001
12 NYCRR PART 801.29(A)General Duty Clause or unstructured citation
Initial$0
Current$0
Othergravity 5
Citation #02002
12 NYCRR PART 801.47(A)General Duty Clause or unstructured citation
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345856231 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Danby Tn Hwy Dept

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345856231 directly: