Skip to main content
Inspection outcome
Opened: December 13, 2021 · Closed: September 9, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Referral · Comprehensive — entire establishment

Violations15
Serious+0
Initial penalty$272,795
Current penalty$190,958
Accidents0
Duration270d
Summary

What happened in this inspection

On December 13, 2021, OSHA opened Cj Tmi Manufacturing America, Llc’s inspection #345688634 at ROBBINSVILLE, New Jersey. The case was administratively closed on September 9, 2022, 270 days after opening.

OSHA cited the employer for 15 violations totaling $190,958 in current penalties — reduced from an initial proposed total of $272,795. All citations were Other-than-serious.

Breakdown by classification
15violations total
Willful17%

A Willful violation is one OSHA determined the employer committed with intentional disregard for, or plain indifference to, the OSH Act. It carries the highest civil penalty — up to ~$165,000 per violation. Willful violations are rare and signal the most serious workplace safety failures.

Repeat17%

A Repeat violation means OSHA cited the employer for a substantially similar violation within the past 5 years. Penalties multiply (up to ~$165,000 per repeat citation) and indicate the employer failed to permanently abate a recurring hazard.

Serious1387%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

15citations issued
$190,958current penalty
↓ $81,837total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001
29 CFR 1910.37(a)(3)View full regulation text on OSHA.gov
Initial$11,167
Current$7,817reduced by $3,350
Seriousgravity 1
Citation #01002
29 CFR 1910.147(c)(2)(ii)View full regulation text on OSHA.gov
Initial$4,786
Current$3,350reduced by $1,436
Seriousgravity 10
Citation #01003
29 CFR 1910.147(d)(4)(i)View full regulation text on OSHA.gov
Initial$11,167
Current$7,817reduced by $3,350
Seriousgravity 10
Citation #01004
29 CFR 1910.151(c)View full regulation text on OSHA.gov
Initial$11,167
Current$7,817reduced by $3,350
Seriousgravity 10
Citation #01005
29 CFR 1910.178(l)(1)(i)View full regulation text on OSHA.gov
Initial$11,167
Current$7,817reduced by $3,350
Seriousgravity 5
Citation #01006
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$9,572
Current$6,700reduced by $2,872
Seriousgravity 10
Citation #01007
29 CFR 1910.212(a)(3)(ii)View full regulation text on OSHA.gov
Initial$11,167
Current$7,817reduced by $3,350
Seriousgravity 5
Citation #01008
29 CFR 1910.243(c)(4)View full regulation text on OSHA.gov
Initial$9,572
Current$6,700reduced by $2,872
Seriousgravity 1
Citation #01010
29 CFR 1910.303(b)(2)View full regulation text on OSHA.gov
Initial$4,786
Current$3,350reduced by $1,436
Seriousgravity 5
Citation #01011
29 CFR 1910.334(a)(2)(ii)View full regulation text on OSHA.gov
Initial$6,381
Current$4,466reduced by $1,915
Seriousgravity 10
Citation #01012
29 CFR 1926.451(f)(3)View full regulation text on OSHA.gov
Initial$11,167
Current$7,817reduced by $3,350
Seriousgravity 10
Citation #01013
29 CFR 1926.451(g)(1)View full regulation text on OSHA.gov
Initial$11,167
Current$7,817reduced by $3,350
Willfulgravity 10
Citation #02001
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$127,624
Current$89,338reduced by $38,286
Repeatgravity 10
Citation #03001
29 CFR 1910.147(c)(7)(i)View full regulation text on OSHA.gov
Initial$22,333
Current$15,635reduced by $6,698

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345688634 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Cj Tmi Manufacturing America, Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345688634 directly: