Skip to main content
Inspection outcome
Opened: February 2, 2022 · Closed: June 4, 2024
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations5
Serious+0
Initial penalty$9,945
Current penalty$5,967
Accidents0
Duration853d
Summary

What happened in this inspection

On February 2, 2022, OSHA opened Exothermic Molding Inc’s inspection #345765762 at KENILWORTH, New Jersey. The case was administratively closed on June 4, 2024, 853 days after opening.

OSHA cited the employer for 5 violations totaling $5,967 in current penalties — reduced from an initial proposed total of $9,945. All citations were Other-than-serious.

Breakdown by classification
5violations total
Serious5100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

5citations issued
$5,967current penalty
↓ $3,978total reduction
Look up on OSHA.gov
Seriousgravity 1
Citation #01001A
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$2,486
Current$1,492reduced by $994
Seriousgravity 1
Citation #01001B
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002A
29 CFR 1910.147(c)(1)View full regulation text on OSHA.gov
Initial$4,144
Current$2,486reduced by $1,658
Seriousgravity 5
Citation #01003
29 CFR 1910.305(g)(2)(iii)View full regulation text on OSHA.gov
Initial$3,315
Current$1,989reduced by $1,326

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345765762 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345765762 directly: