Skip to main content
Inspection outcome
Opened: July 27, 2018 · Closed: April 7, 2023
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Referral · Partial — limited to specific operations or areas

Violations10
Serious+0
Initial penalty$15,523
Current penalty$2,000
Accidents0
Duration1715d
Summary

What happened in this inspection

On July 27, 2018, OSHA opened Pioneer Metal Finishing, Inc.’s inspection #343351045 at FRANKLINVILLE, New Jersey. The case was administratively closed on April 7, 2023, 1715 days after opening.

OSHA cited the employer for 10 violations totaling $2,000 in current penalties — reduced from an initial proposed total of $15,523. All citations were Other-than-serious.

Breakdown by classification
10violations total
Serious10100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

10citations issued
$2,000current penalty
↓ $13,523total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001A
29 CFR 1910.107(b)(10)View full regulation text on OSHA.gov
Initial$2,772
Current$333reduced by $2,439
Seriousgravity 5
Citation #01001B
29 CFR 1910.107(c)(8)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01002
29 CFR 1910.107(c)(2)View full regulation text on OSHA.gov
Initial$2,772
Current$333reduced by $2,439
Seriousgravity 5
Citation #01003
29 CFR 1910.107(l)(4)(i)View full regulation text on OSHA.gov
Initial$2,772
Current$333reduced by $2,439
Seriousgravity 5
Citation #01004
29 CFR 1910.133(a)(1)View full regulation text on OSHA.gov
Initial$2,772
Current$333reduced by $2,439
Seriousgravity 1
Citation #01005A
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$1,663
Current$334reduced by $1,329
Seriousgravity 1
Citation #01005B
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01006A
29 CFR 1910.1200(e)(1)View full regulation text on OSHA.gov
Initial$2,772
Current$334reduced by $2,438
Seriousgravity 5
Citation #01006B
29 CFR 1910.1200(g)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 5
Citation #01006C
29 CFR 1910.1200(h)(1)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 343351045 at OSHA Establishment Search.

Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Referral — See our glossary for the full list of inspection trigger types.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 343351045 directly: