Skip to main content
Inspection outcome
Opened: April 5, 2023 · Closed: January 16, 2026
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Complaint · Partial — limited to specific operations or areas

Violations20
Serious+0
Initial penalty$87,504
Current penalty$61,253
Accidents0
Duration1017d
Summary

What happened in this inspection

On April 5, 2023, OSHA opened Mirion Technologies, (capintec) Inc.’s inspection #346611742 at FLORHAM PARK, New Jersey. The case was administratively closed on January 16, 2026, 1017 days after opening.

OSHA cited the employer for 20 violations totaling $61,253 in current penalties — reduced from an initial proposed total of $87,504. All citations were Other-than-serious.

Breakdown by classification
20violations total
Serious20100%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Citations

Citations issued in this inspection

20citations issued
$61,253current penalty
↓ $26,251total reduction
Look up on OSHA.gov
Seriousgravity 10
Citation #01001A
29 CFR 1910.1025(c)(1)View full regulation text on OSHA.gov
Initial$10,938
Current$7,656reduced by $3,282
Seriousgravity 10
Citation #01001B
29 CFR 1910.1025(d)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01002
29 CFR 1910.1025(e)(3)(i)View full regulation text on OSHA.gov
Initial$10,938
Current$7,656reduced by $3,282
Seriousgravity 10
Citation #01003A
29 CFR 1910.1025(f)(2)(i)View full regulation text on OSHA.gov
Initial$10,938
Current$7,656reduced by $3,282
Seriousgravity 10
Citation #01003B
29 CFR 1910.134(c)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01003C
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01003D
29 CFR 1910.134(f)(2)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01003F
29 CFR 1910.134(k)(1)View full regulation text on OSHA.gov
Initial$0
Current$0
Seriousgravity 10
Citation #01004
29 CFR 1910.1025(h)(1)View full regulation text on OSHA.gov
Initial$10,938
Current$7,656reduced by $3,282
Seriousgravity 10
Citation #01005A
29 CFR 1910.1025(i)(2)(i)View full regulation text on OSHA.gov
Initial$10,938
Current$7,656reduced by $3,282
Seriousgravity 10
Citation #01006A
29 CFR 1910.1025(j)(1)(i)View full regulation text on OSHA.gov
Initial$10,938
Current$7,656reduced by $3,282
Seriousgravity 10
Citation #01007A
29 CFR 1910.1025(l)(1)(i)View full regulation text on OSHA.gov
Initial$10,938
Current$7,656reduced by $3,282
Seriousgravity 10
Citation #01008
29 CFR 1910.1025(m)(2)(i)View full regulation text on OSHA.gov
Initial$10,938
Current$7,661reduced by $3,277

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 346611742 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Mirion Technologies, (capintec) Inc.

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Complaint — an inspection triggered by a worker complaint.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 346611742 directly: