Skip to main content
Inspection outcome
Opened: October 13, 2020 · Closed: October 18, 2021
Citations issued

OSHA issued one or more Other-than-serious citations.

Health inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations12
Serious+0
Initial penalty$18,960
Current penalty$10,322
Accidents0
Duration370d
Summary

What happened in this inspection

On October 13, 2020, OSHA opened Absolute Finishing Llc’s inspection #344991500 at LAS VEGAS, Nevada. The case was administratively closed on October 18, 2021, 370 days after opening.

OSHA cited the employer for 12 violations totaling $10,322 in current penalties — reduced from an initial proposed total of $18,960. All citations were Other-than-serious.

Breakdown by classification
12violations total
Serious758%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious542%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

12citations issued
$10,322current penalty
↓ $8,638total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01006B
29 CFR 1910.107(c)(7)View full regulation text on OSHA.gov
Initial$2,107
Current$0reduced by $2,107
Seriousgravity 5
Citation #01008
29 CFR 1910.134(e)(1)View full regulation text on OSHA.gov
Initial$2,633
Current$1,843reduced by $790
Othergravity 1
Citation #02001B
29 CFR 1910.134(k)(5)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 1
Citation #02001D
29 CFR 1910.1200(f)(6)View full regulation text on OSHA.gov
Initial$0
Current$0
Othergravity 5
Citation #02002
29 CFR 1910.107(e)(5)View full regulation text on OSHA.gov
Initial$2,107
Current$0reduced by $2,107
Seriousgravity 5
Citation #01001
29 CFR 1910.106(e)(6)(ii)View full regulation text on OSHA.gov
Initial$3,160
Current$2,212reduced by $948
Seriousgravity 5
Citation #01002
29 CFR 1910.107(b)(5)(i)View full regulation text on OSHA.gov
Initial$2,633
Current$1,843reduced by $790
Seriousgravity 1
Citation #01003
29 CFR 1910.107(b)(9)View full regulation text on OSHA.gov
Initial$1,580
Current$1,106reduced by $474
Seriousgravity 5
Citation #01004
29 CFR 1910.107(b)(10)View full regulation text on OSHA.gov
Initial$2,107
Current$1,475reduced by $632
Seriousgravity 5
Citation #01005A
29 CFR 1910.107(c)(2)View full regulation text on OSHA.gov
Initial$2,633
Current$1,843reduced by $790

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 344991500 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Absolute Finishing Llc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 344991500 directly: