Skip to main content
Inspection outcome
Opened: November 29, 2021 · Closed: April 20, 2022
Citations issued

OSHA issued one or more Other-than-serious citations.

Safety inspection · Planned (Programmed) · Comprehensive — entire establishment

Violations11
Serious+0
Initial penalty$50,981
Current penalty$25,492
Accidents0
Duration142d
Summary

What happened in this inspection

On November 29, 2021, OSHA opened Kanta Products Inc’s inspection #345669758 at THREE FORKS, Montana. The case was administratively closed on April 20, 2022, 142 days after opening.

OSHA cited the employer for 11 violations totaling $25,492 in current penalties — reduced from an initial proposed total of $50,981. All citations were Other-than-serious.

Breakdown by classification
11violations total
Serious982%

A Serious violation is one where there is substantial probability that death or serious physical harm could result, and the employer knew (or should have known) of the hazard. Maximum penalty is ~$16,550 per violation. The majority of OSHA citations fall into this category.

Other-than-serious218%

An Other-than-serious violation has a direct relationship to job safety and health but probably would not cause death or serious physical harm. Maximum penalty is ~$16,550 per violation. Often involves recordkeeping or procedural lapses.

Citations

Citations issued in this inspection

11citations issued
$25,492current penalty
↓ $25,489total reduction
Look up on OSHA.gov
Seriousgravity 5
Citation #01001
5A0001General Duty Clause or unstructured citation
Initial$7,044
Current$3,522reduced by $3,522
Seriousgravity 5
Citation #01002
29 CFR 1910.28(b)(11)(ii)View full regulation text on OSHA.gov
Initial$7,044
Current$3,522reduced by $3,522
Seriousgravity 1
Citation #01003
29 CFR 1910.29(b)(13)(i)View full regulation text on OSHA.gov
Initial$5,283
Current$2,642reduced by $2,641
Seriousgravity 5
Citation #01004
29 CFR 1910.147(c)(4)(i)View full regulation text on OSHA.gov
Initial$8,806
Current$4,403reduced by $4,403
Seriousgravity 5
Citation #01005
29 CFR 1910.184(d)View full regulation text on OSHA.gov
Initial$7,044
Current$3,522reduced by $3,522
Seriousgravity 1
Citation #01006
29 CFR 1910.212(a)(1)View full regulation text on OSHA.gov
Initial$5,283
Current$2,642reduced by $2,641
Seriousgravity 1
Citation #01007A
29 CFR 1910.219(c)(4)(i)View full regulation text on OSHA.gov
Initial$4,490
Current$2,245reduced by $2,245
Seriousgravity 5
Citation #01008
29 CFR 1910.253(b)(4)(iii)View full regulation text on OSHA.gov
Initial$5,987
Current$2,994reduced by $2,993
Other
Citation #02001
29 CFR 1910.38(b)View full regulation text on OSHA.gov
Initial$0
Current$0

Standard codes link to the regulation text on OSHA.gov. The text describes the rule itself; the specific findings of this inspection appear above. To see OSHA’s official record of this inspection, search activity number 345669758 at OSHA Establishment Search.

Same employer

Other OSHA inspections at Kanta Products Inc

Earlier or related cases at this establishment.

Full inspection history →
Reference

About OSHA inspections

The U.S. Occupational Safety and Health Administration (OSHA) conducts inspections under several triggers: programmed targeting of high-hazard industries, employee complaints, workplace accidents, fatalities, and follow-ups to prior citations.

📋
Citations

Each citation specifies a section of 29 CFR, a severity tier, and a proposed penalty. Employers can contest citations through OSHA’s informal conference or before the OSH Review Commission.

Open vs closed

An open case has not yet been administratively closed — citations may follow or the case may close without action.

💰
Current vs initial penalty

Initial penalty is the proposed amount at citation. Current penalty is the post-conference / settlement figure on file today.

🔗
Trigger types

A = Accident, B = Complaint, H = Programmed, F = Follow-up. See the glossary for all codes.

About this inspection

OSHA classified this as Planned (Programmed) — a programmed (planned) inspection, typically targeting high-hazard industries.

Sources

Cross-check with OSHA directly

This page draws from the OSHA Integrated Management Information System (IMIS) via the DOL Open Data Portal. For the authoritative record, look up activity number 345669758 directly: